DSI PBL Bypass System with modified High Flow (HF) configuration brings about a “fit for purpose” solution for a major oil and gas service company in Mexico
Performance Bulletin
DSI PBL Bypass System Saving Time and Money on a Major Norwegian Operator’s “Cut and Pull” Operation
Performance Bulletin
DSI PBL Bypass System with High Flow (HF) configuration allows gyro probe to take surveys in an offshore exploration well in Mexico
DSI PBL® Bypass System saves thousands of dollars on rig NPT to operator, by allowing LCM and cement pumping in a DW well – Cuenca Salina basin in Mexico
Performance Bulletin
DSI PBL® Bypass System requested to be used for a Split Flow Application, successfully delivered Lost Circulation Material
Performance Bulletin
PBL® Bypass System Saves Time and Money for a Major Norwegian Operator During Coring Operations
Performance Bulletin
PBL® Bypass System – Optimized Hole Cleaning, Less Operating Time – Thru-Tubing Services – Argentina
Performance Bulletin
PBL® Bypass System used with Fast Dart in high fluid weight, hole angle and depth for a Malaysian wellbore clean-up application
Performance Bulletin
DSI-PBL® Bypass System Successfully Utilized by Middle East Operator in Split Flow Application
Performance Bulletin
PBL® Bypass System – Passing Thru Casing ID Restrictions/Collapsed Points – Thru-Tubing Services Argentina
News
Using PBL for Vibration Mitigation
If off bottom high speed string rotation during clean up cycle is a concern (vibrations, tool failures, etc.), a PBL tool can be used as an alternative for achieving the hole cleaning objective.
Activating the tool to bypass flow above the BHA will allow for higher flow rate by eliminating the BHA and bit pressure losses.
Depending on the hydraulics and ECD limitations, if high flowrate can achieve a turbulent regime across the drill pipe annulus, this can be effectively used to achieve the hole cleaning objective without subjecting the BHA to high speed off bottom rotation, thus preventing any further risk of damage/ failure to the BHA.
News
Introducing, “The PBL Booster Tool”
DSI FZE is pleased to introduce a new option for splitting the flow while drilling, completion and workover operations. With a single ball activation/de-activation cycle a pre-calculated amount of drilling or completion fluid will pass through the Booster Tool and on to the BHA below while the remaining fluid is diverted out of the Booster Tool ports. The ability to split the flow gives the operator more options on available hydraulics and hole cleaning parameters.
News
Circulating the Hole clean
Illusion or reality? The following publications covers certain interesting and useful issues concerning hole-cleaning in combination with PBL tools.
News
NS-1 Level 2 Design Approved
Design of PBL systems sizes 3-1/8", 4-3/4", 6-3/4" & 8-1/4" have been FEARNLEY INTERNATIONAL GROUP LTD NS-1TM Level 2 approved.